FANATEC Forza Motorsport CSR Wheel Manual - 5. Installation

5. Installation

5.1 Shifter

6.

  Put the wheel on the side to build up some counterforce and press the 

gear stick on the tubes from above until you see the metal tubes coming 

out on the other side of the gear stick channels side.

7. 

 Connect the gear stick using the short PS/2 cable (purple end) to the 

purple shifter connector of the wheel.

Please note that you can mount the shifter on both sides but only one 

gear stick can be active at a time.

Important: 

The 7GS must be calibrated before you can use it (6.3)