Fantasea FP-4 Operator's manual - 4: Lens Port:
4
Numbered description below refers to corresponding numbers
on above graphic.
1: Shutter Release button:
This is a two stage shutter-release button. First lightly press
the shutter-release button halfway, stopping when you feel
minimal resistance. Once the camera has focused, press the
shutter-release button the rest of the way down to release the
shutter and take the picture.
2: Buckle to secure housing:
Refer to the section "Using the Fantasea FP-4 Housing"
on how to open and close the camera housing.
3: Removable Flash diffuser:
To diffuse the flash's intensity [the internal flash]. See the
section on "Accessory Slave Flash" for additional information.
4: Lens Port:
Refer to the section "Inserting Camera" for useful information.
5 : Mode button:
This button when rotated is used to select one of the following
modes:
Auto shooting mode
Exposure mode
Scene mode
Movie mode
Setup mode
Image mode
ISO sensitivity mode
White balance mode
Wireless transfer mode
6 : Zoom Out:
The zoom control is used to frame subjects in the monitor.
Press W to zoom out, increasing the area visible in the frame.
An indicator on the monitor shows the amount of zoom when
the zoom buttons are pressed.