Fantasea FP-4 Operator's manual - Opening The Housing:
8
8
Using the Fantasea FP-4 housing:
Opening The Housing:
Observe that the locking mechanism has 2 recessed spring tabs.
Place the lower corner of the housing against your stomach
and with 2 fingers, press these tabs together while your other
hand frees the rounded housing latch by gently pulling upwards.
Next, release the flanged locking mechanism from the other
half of the housing and the housings will open.
1.
2.
The Nikon Coolpix P4 features a selection of three Nikon innovations
that give the photographer the ability to actually improve the quality of
images in-camera. The Face-priority AF function has the ability to
cleverly locate the presence of human faces in the frame and then provide
optimized focus accordingly for sharper portraits time after time.
Nikon Coolpix Software - Image Correction
The Coolpix F3 features the additional advantage of built-in Wi-Fi
capability to add further enjoyment and flexibility to digital photography.
Built-In Wi-Fi
Inserting Camera:
Since the Fantasea's FP-4 was specifically designed for the
Coolpix P3 and P4 digital cameras, insertion is a simple matter
of placing the camera in the housing.
2. After camera insertion, be sure that the extended camera lens
does not catch or bend the black rubber seat on the inside of
the lens port. It is vital that the lens does not disturb this rubber
seat.
Make sure the camera lens is centered in the rounded port area
and that the lens does not distort the round black rubber seat.
The housing is designed to have the camera fit in place perfectly,
but if you are not careful, it is possible to put it in at an improper
angle and hence it will be impossible to get a good seal or easy
closure of the housing.
1.