Fantasea FP-4 Operator's manual - 9: Center Ok Button:
5
The zoom indicator will turn yellow when the digital zoom
is in effect.
9: Center OK button:
This button authorizes [confirms] the selections made when
the Delete, Menu and Rotary Multi selector buttons are used.
Must be swiveled into place when pressing OK and see that
it does not interfere with the action of the Rotary Multi
Selector button.
Note!
Before making a selection from the Rotary Selector
button, be sure the flange of the OK button is moved
away from the Multi Selector field. You may have to
move the Menu button flange to a different position to
accommodate proper placement of the OK button
7: Zoom In:
When the camera is zoomed in to the maximum magnification
[3.5x] in optical zoom, holding the T down for approximately
2 seconds will produce the digital zoom. Note that unlike the
optical zoom, the digital zoom will not increase the amount
of detail visible in the picture they are simply enlarged
producing a slightly grainy image therefore not recommended
especially underwater due to image quality.
An indicator on the monitor shows the amount of zoom when
the zoom buttons are pressed.
The zoom indicator will turn yellow when the digital zoom
is in effect.
8: Menu:
The menu control allows for the following functions:
Shooting
playback
movie
setup menus
These are available when the requested mode is selected
[button#5] and then the Menu button is pressed. The Menu
screen is navigated using the Multi selector and OK buttons
[# 9 and 10].