Fantec MR-35DRN User Manual - page 6
HDD is detected whether installed or not by system automatically. A new non-
formatted HDD was found, formatting hard drive is suggested by the pop up
window. And the system will restart after format complete automatically. If a
formatted HDD is found, then the system gets user information from HDD.
Quick Setup
To modify the language support in web page, please follow the instruction below
To add user support, select the “Add User” chapter for setting. Please refer to
“Users and Groups” chapter for more detail.
To add group support, select the “Add Group” chapter for setting. Please refer to
“Users and Groups” chapter for more detail.
To add folder sharing support, select the “Add Share” chapter for setting. Please
refer to “Share Management” chapter for more detail.
2.4 User and Group Management
In User Management menu, it shows all existing users in the system. A new user
is created by filling out the form and click “Save” button. To delete a specified
user, you need to select the existing user and click “Delete User” button. Click
“Group” button to enter the Group management menu.
In Group Management menu, it shows all existing groups in the system. A new
group is created by filling out the form and click “Save” button. Select the existing
group name and click “Delete Group” button to delete a specified group. Add or
Remove users from an existing group can be done by highlighting the group name
and click “Members” button.
2.5 File
Three sections are included in “File and Print”, which are “File server”, “Share
Management”, and “Printer server”.
8
9
The “Disk spin
down time”
allows you to
enable the
energy-saving
mode. The disks
will spin down
after the
appointed time,
if no access to
the MR-35DRN
is in progress.
Please follow the
steps 1 to 6 from
the “Wizard” to
configure the
MR-35DRN in
quick mode. If
you don’t use a
DNS Server
(step 4/6) please
enter 0.0.0.0 to
the input mask.