Fantec MR-35DRN User Manual - page 7
2.6 File and Print
2.6.1 File Server
Windows Setting
FTP Server setting
NFS Server Setting
Guest Access Setting
2.6.2 Share Management
Click “Enable” check box to enable Microsoft Windows connection
Set Workgroup name for Windows client to access
Define Windows Internet Name Server IP address
Click “Enable” box to enable FTP server function, and default port 21.
Click “Enable” box to enable NFS server function
Click “Enable” box to allow user using guest-share folder and guest-user set
upload quota (Mega Bytes)
It shows all existing shares. “public” is the factory default share located at system
/shares/public directory.
Create Share
Property Change
Windows and FTP Access
NFS Access
Delete Share
Press “Save” button, after fill in “Share name” and “Path” box, will create a new
share.
Click a share in “Existing Shares” box could modify property of the share. Press
“Windows, FTP Access” or “NFS Access” button could set or remove read/write
permission of the share.
“Allow for all” is to allow all users to access the shared storage in the server; or
you may specify User/Group name in Access box and select “Read Only” or
Writable permission to the User/Group.
You could check “Allow for all” to allow all clients access NFS server. Or add client
PCs IP address/Subnet mask to the permission list to allow only permission list to
access the NFS server.
“Delete Share” deletes a specified share.
10
(Use “Start” , “Run” and
input \\192.168.3.1 to
locate all existing shares.
According to the sample
you have to enter
“\\192.168.10.110”.
2.7 System setting
2.7.1 LAN Settings
Hostname
IP address setting
There are eight sections are included in “System Setting”, which are “LAN
Settings”, “WAN Settings”, “DDNS”, “Qos”, ”Time Settings”, “Turn Off Server”,
“Information”, “Disk Usage”, and “Error Notification”.
You must assign a unique name for each MR-35DRN as the identification within
your local area network. The default hostname is “fantec”.
You must assign a unique IP address for each MR-35DRN as the identification
within your local area network. The default IP address is “192.168.3.1”.
2.6.3 Printer Server
Check Printer Server “Enable” box to enable Print Server functions.
11
To add a new printer
in your printer
management please
enter following URL
to the input mask of
your operating
system:
“\\192.168.3.1\lp”.
According to the
sample you have to
entrer:
“\\192.168.10.110\lp”
.