Fantic Caballero 125 series Owner's Manual - page 89

89

ENG

LISH

The lamp bracket complete with headlamp re-

mains connected to the electric cables. 

DO NOT 

TUG ON THE ELECTRIC CABLES.

To work more comfortably the headlamp 

may be detached by loosening the two side 

screws.

-  Shift the complete lamp bracket to the side.

NOTE: handle the plastic parts with care; do not 

scratch or damage them.

POSITION LIGHT BULB

Do not tug on the electric cables to take out the 

lamp-holder.

-  Grasp the lamp-holder and pull it out of its seat.

-  Take out the position light bulb (1) and re-

place it with one of the same type.

DIPPED/FULL BEAM BULB

-  Do not tug on the electric cables to remove 

the bulb electric connector.

-  Remove the black rubber sleeve from the 

central lamp-holder.

-  Release the lamp-holder retaining spring (3) 

and remove it.

-  Draw out the lamp-holder (2) from the pa-

rabola seat.

-  Press the bulb gently and turn it counter-

clockwise.

-  Take out the bulb from its seat.

Once the bulb has been changed, just proceed 

with the disassembly stages in the reverse order 

in order to remount the optical unit.