Farm King 500 Operator And Parts Manual - Service Schedule Chart
Maintenance - 500, 600, 660
45
Service Schedule Chart
WARNING
Instructions are necessary before operating or servicing equipment. Read and understand the
Operator And Parts Manual and safety signs (decals) on equipment. Follow warnings and instructions
in the manuals when making repairs, adjustments or servicing. Check for correct function after
adjustments, repairs or service. Untrained operators and failure to follow instructions can cause
injury or death.
Note: If a problem is encountered that is difficult to solve, even after having read through this
troubleshooting section, please call your local distributor, dealer or factory. Before you call, please
have this Operator And Parts Manual and the serial number of your machine at hand.
Maintenance work must be done at regular intervals. Failure to do so will result in excessive wear and
early failures. The service schedule is a guide for correct maintenance of the snowblower.
#
DESCRIPTION
SERVICE PROCEDURES
CHECK
CLEAN
LUBE
CHANGE
COVER
DRAIN
Daily Maintenance (or every 8 hours)
1
PTO Cross and Bearings
Weekly (or every 50 hours)
2
PTO Telescoping Tubes
3
Slip Clutch Connector
4
PTO Quick Disconnect
5
Spout Ring & Clamps
6
Chain Drive
Annually (or every 500 hours)
5
Driveline & Gears
7
Machine