FARONICS DEEP FREEZE ENTERPRISE Manual - page 28

Deep Freeze Enterprise User Guide

  28

|

  Using Deep Freeze Configuration Administrator

ThawSpace

ThawSpace is a virtual partition that can be used to store programs, save files, or make permanent 

changes. All files stored in the ThawSpace are retained after a restart, even if the computer is 

Frozen.

To create a single ThawSpace or multiple ThawSpaces using the Configuration Administrator, 

complete the following steps:

1. Select the Drive Letter. The default letter is T:. However, it can be changed to any available 

letter. The next available letter is automatically used if the selected drive letter already exists 

on a computer when Deep Freeze is installed. 

— When  a  Drive Letter is selected from the drop-down and used to create a ThawSpace, it is 

removed from the drop-down.

— When a ThawSpace is removed, the corresponding Drive Letter is added back to the 

drop-down.

— The Drive Letter cannot be same as the Host Drive. 

2. Enter the Size. This is the size of the ThawSpace. The maximum size is 1024 GB and the 

minimum size is 16MB. 

— If the computer does not have enough free space to accommodate the selected ThawSpace 

size, the size of the ThawSpace is adjusted downward to ensure proper operation of the 

computer. 

— If you select the Size less than 16MB, the ThawSpace is set to 16MB. 

— If you select the Size more than 1024GB (1TB), the ThawSpace is set to 1024GB (1TB).