FARONICS DEEP FREEZE ENTERPRISE Manual - page 54

Deep Freeze Enterprise User Guide

  54

|

  Using Deep Freeze Enterprise Console

The two tabs on the Configuration Screen can be used to update the configuration on remote 

computers. Close the Configuration Screen after making the necessary changes in configuration. 

For further information about the options on each tab, refer to 

Using Deep Freeze Configuration 

Administrator

.

The following message is displayed:

3. Click OK.

4. In the Workstations pane, select the required computer(s) to be dynamically updated with the 

new configuration settings.

5. Click Send on the menu bar to send the new configuration settings to the selected 

computer(s). The following message is displayed. 

6. After sending the new configuration settings to the selected computers, the following options 

are available:

— Click Save As to save the current settings of the Configuration Screen to a file. A standard 

Save File dialog displays where a location and file name can be specified.

— Click Edit at any time to re-open the Configuration Screen with the current settings intact.

— Click Close to clear the contents of the Configuration Screen and exit out of the dynamic 

configuration mode.

When updating the configuration on the computer, the Embedded Events and 

Maintenance tab options are updated with the new settings.