FARONICS DEEP FREEZE ENTERPRISE Manual - page 53

Managing Deep Freeze with the Console

|

53 

 Deep Freeze Enterprise User Guide

Dynamically Updating a Deep Freeze Configuration 

Complete the following steps to dynamically update the configuration on a single or multiple 

computers.

1. Right-click on the computer(s) and select Update Embedded Events from the contextual 

menu. Or, select the desired computer(s) and click the Update Embedded Events icon in the 

toolbar.

2. A menu bar with six buttons appears at the bottom of the Workstations pane. Choose one of 

the following options:

— Click New to create a new sub-configuration set.

— Click Import to import the settings from an existing Deep Freeze Configuration file (.rdx) or 

Deep Freeze Workstation Installation File (.exe) into the sub-configuration window.

In either case, a Configuration Screen, similar to the Configuration Administrator, appears 

containing the Embedded Events tab and Maintenance tab.

If the Network options in the new configuration have changed, the computer(s) 

may lose communication with the existing Enterprise Console. If communication 

with the computers is lost, check the Network settings on the updated computers 

to ensure that the port numbers and/or IP address of the Console have not been 

changed.

Changes to passwords take effect immediately. All other changes take effect after 

each computer is restarted. ThawSpace and/or Frozen Drives cannot be changed 

through updating the configuration file.