- DL manuals
- Faroudja
- Processor
- DVP3000
- Installation And Operation Manual
Faroudja DVP3000 Installation And Operation Manual
Summary of DVP3000
Page 1
0 dvp3000 dvp3000u digital video processor installation and operations manual.
Page 2
1 product description 2 installation 4 inventory list 4 setup 6 operating instructions 9 remote control 10 rs232 commands 12 specifications 14 warranty 16 table of contents this manual applies to both the dvp3000 and dvp3000u. All features listed for the dvp3000 also apply to the dvp3000u. Features ...
Page 3
2 the faroudja dvp3000 digital video processor/scaler is the ideal solution for optimizing the growing selection of display devices that require high performance results. The unit is a precision video instrument used to convert 480i interlaced signals into high- resolution progressively scanned imag...
Page 4
3 the greatest benefit of the dvp3000 is the image quality, a result of a complex three stage process called picture plus™ technology. Stage 1 – color decoding: adaptive comb filter- cross color suppression - bandwidth expansion in order for the display to create an image, it must receive red, green...
Page 5
4 unpacking remove the dvp3000 unit from the shipping container and examine it for any signs of shipping damage or missing items (check inventory list below). All shipping materials should be saved if the unit is to be moved or returned for service. Installation the dvp3000 processor is designed to ...
Page 6
5 connections this page outlines how different sources and displays can be connected to the dvp3000. Because of the high performance of the dvp3000 it is very important to use the highest quality cables possible, for both input and output signals. Both the rgb bnc and the d15 monitor output connecti...
Page 7
6 setup setup offers functions that must be done when the unit is initially installed. Some user features are not available with a few of the setup selections so this must be done first. To prevent accidental alteration of the setup parameters, setup can only be done from the front panel or with the...
Page 8
7 note: it is necessary to identify which signal format and refresh rate is being used in order to synchronize the output. If the scan rate being used is not listed, try each of the offered rates until an image appears. Pass-through v rate 60hz 75hz 85hz note: if the hdtv format is selected, the v-r...
Page 9
8 how it works with “widescreen” selected in the setup menu, the on-screen image looks like this with both anamorphic and letterbox sources: since the dvp3000 controls the aspect ratio conversion, the projector stays in the anamorphic setting providing maximum resolution. The scan structure benefits...
Page 10
9 front panel controls 1. Power/standby: press to turn the unit on (green) or to standby (red) 2. Infrared sensor window 3. Function + / - : cycles up or down through the available control functions 4. Value +/ - : adjusts the levels or changes settings of the function selected. 5. Factory preset: r...
Page 11
10 color 0-255, factory 128 tint 0-255, factory 128 detail 0-15, factory 8 noise reduction 0-15, factory 8 recall preset select preset 1, press factory select preset 2, press factory select preset 3, press factory select preset 4, press factory select factory, press factory note: to recall presets, ...
Page 12
11 each press toggles to the next input or press the number pad while the osd is visible for: 1. Composite video 2. S-video 3. Component 4. Hdtv/computer pass-through to select a user preset press: repeated pressing will toggle through the four user and one factory presets. The presets can also be d...
Page 13
12 then adjust the values by pressing the buttons. For direct access, press the color button, then enter the value on the keypad such as 150. Tint can be accessed by pressing: then adjust the values by pressing the buttons. For direct access, press the tint button, then enter the value on the keypad...
Page 14
13 setup commands command function sz# image size (0=cropped, 1=normal) s# scan rate (0-8) 0= line doubled 1= frame doubled* 2= 800x600 3= 720p 4= 1024x768 5= line quadrupled (960p) 6= 1280x1024 7= 1080p 8= 1080i w# screen shape, (0=widescreen, 1=4x3) fn input video standard 0=1=auto,2=paln 3=palm m...
Page 15
14 dvp3000 / dvp3000u inputs (interlaced) composite 1vpp s-video y – 1v pp c -286mv pp component (ycrcb) y - 1vpp (interlaced) cr – 700mv pp cb – 700mv pp component (yprpb) y - 1vpp (progressive) cr – 700mv pp cb – 700mv pp computer/hdtv d15m (progressive or interlaced) (note: input format must matc...
Page 16
1 appendix a – scan rate specifications ntsc mode line double frame double 800x600 720p 1024x768 quad 1280x1024 1080p 1080i horizontal frequency (khz) 31.468 62.938 37.76 44.95 48.31 62.94 63.89 67.43 33.715 vertical frequency (hz) 59.94 119.88 59.94 59.94 59.94 59.94 59.94 59.94 59.94 scan type pro...
Page 17
0 limited warranty faroudja laboratories, inc. (“ faroudja” ) warrants that its products will be free of defects in workmanship and material and conform substantially to published specifications under normal use and service. This warranty is made to the first purchaser of the products and extends fo...