Faroudja DVP3000 Installation And Operation Manual - page 11
10
Color
0-255, Factory 128
Tint
0-255, Factory 128
Detail
0-15, Factory 8
Noise Reduction
0-15, Factory 8
Recall Preset
Select Preset 1, Press Factory
Select Preset 2, Press Factory
Select Preset 3, Press Factory
Select Preset 4, Press Factory
Select Factory, Press Factory
Note: To recall Presets, first select it using the
Value keys, then press the Factory key to recall
the preset. The word Changed will appear if any
adjustment has been made in the picture and
was not stored in a preset.
Save Preset
Save to Preset 1, Press Factory
Save to Preset 2, Press Factory
Save to Preset 3, Press Factory
Save to Preset 4, Press Factory
Note: To save Presets, first select the desired
preset with the Value keys, then press Factory to
enter.
Enter / Exit Setup menu
Press Factory
Storing User Preset
There are a total of 20 presets that can be
stored, four for each input (Composite, S-Video,
Component Interlaced, Component Progressive
and HDTV Pass-Through). Each preset stores
all picture and setup functions. This includes
scan rates, output format and picture levels.
The DVP3000U offers an additional bank of 16
presets for PAL sources.
Remote Control Operation
The remote control is a multi-function smart
remote that can control up to eight sources
including the DVP3000. See the separate
remote manual for complete instructions. The
following instructions cover the operation of the
DVP3000 only.
In many cases there are three ways to control the
unit:
1. By toggling through the different Functions
and Values using the Keys.
2. By Direct Access + keys.
3. By Direct Access + 1, 2, 3 keys
To activate the control of the DVP3000 press:
To turn On press:
To select an Input press:
FDJA
1
POWER
INPUT
CENTER
Operating Instructions