Faroudja NRS-DVI Installation And Operation Manual - Ir Remote and
IR REMOTE AND
OSD OPERATION
The NRS-DVI is shipped with an eight button remote
for controlling all Functions available in the unit.
The remote control allows for easy operation by
simple navigation through the On Screen Display
(OSD) menus. Repeated Pressing of a button toggles
through the available choices.
ON SCREEN DISPLAY (OSD)
Accessing the OSD
•
Press Menu button to bring up main Index.
•
Use Function Keys until the triangle at the
top of the OSD turns yellow.
•
Press the Select Key to toggle to the next
menu page. A list of available Functions
will appear.
•
Press Function Up/Down keys to select
an adjustment.
•
Use Value Up/Down keys to adjust.
The main menu drops away and a single
line menu appears.
•
Use the Function keys return to the drop
down menu.
•
Press Menu again to cancel OSD
Note: If a single Function menu is visible when the
Menu button is pressed, the single Function line last
use will appear when the Menu button is pressed
again. Press the Function Up/Down key to return to
the full OSD menu.
Note: Unused inputs can be deactivated for simpler
operation of the processor. See the Setup
instructions for details.
6
IR REMOTE / OSD
INPUT
PICTURE
DISPLAY
PATTERNS
FORMATS
INPUTS
DVD
ASPECT
ANAMORPHIC
PRESETS
RECALL
F 1 2 3 4
STORE
1 2 3 4
Press the Function UP/Down
keys until the triangle turns
Yellow. Press the Select key
to cycle to the Menu tabs.
Press the Function
UP/Down keys to highlight
a Function. Use the Value
key to change selection or
values.
Cycle Input
Select:
Press Input Mode
Cycle Menu
Select:
Press Select
To Enter:
Press Enter
Select OSD
Functions:
Press Function
Up/Down
Toggle Power
On/Off:
Press Power
Toggle OSD
On/Off:
Press Menu
Change Value:
Press Value
Up/Down