Fast 30400-KIT-EZ-EF Instructions Manual - page 22
22
CAN Link
CAN enabled devices: FAST™ EZ‐LS™, FAST™
XIM™, TCI® EZ‐TCU™, etc.
Configurable
Input
Gray/Black
Reserved for future use.
Configurable
Output
Blue/Yellow
Reserved for future use.
Coolant Temp
Coolant Temperature Sensor (CTS) typically
installed in intake manifold. (This lead
comes from the throttle body harness.)
Crank Trigger
FAST™ Crank Trigger or other 2‐wire
inductive pickup. This is one option for a
crank reference input to allow EZ‐EFI® to
control ignition timing.
See Ignition System Options for more
details.
If this connector is being used, the
“DISTRIBUTOR” connector and “RPM INPUT”
wire will not be used.
Distributor
FAST™ Dual Sync Distributor connector or
other discrete pickup. This is one option for
a crank reference input to allow EZ‐EFI® to
control ignition timing. This connector is
also used to interface to a FAST™ EZ‐LS™ /
FAST™ XIM™ ignition system for coil‐per‐
cylinder applications. See Ignition System
Options for more details.
If this connector is being used, the “CRANK
TRIGGER” connector and “RPM INPUT” wire
will not be used.
Distributor
Power
Pink
FAST™ Dual Sync Distributor power wire.
This feeds 12V switched power to a FAST™
Dual Sync Distributor or this can power a
FAST™ EZ‐LS™ / FAST™ XIM™ ignition