Fast 30400-KIT-EZ-EF Instructions Manual - page 29

29 

be an opportunity to check the alignment and compensate for any misalignment with the 

hand-held later in this installation procedure.   

5. Clamp down the distributor.

6. Next, it is important to phase the rotor to the cap. This will ensure that the rotor is in the

correct position throughout the timing sweep in order to fire to the correct cylinder

terminal.  If the rotor is not properly phased then during operation the rotor tip can sweep

too far away from the correct terminal causing a weak spark or mis-fire and a lot of

electrical noise.  In order to correctly phase your distributor, you will need a phasable rotor

(such as MSD PN 84211) if you do not already have one.

Phasable Rotor 

7. Install the phasable rotor bottom and loosely install the rotor top.

Paddle Wheel 

Pickup 

Align