FeiYu Tech SUMMON User Manual - page 10
8. Charging mode
5V USB power adapter
(Equipped by user )
Connect to USB port, and connect with 5V USB power adapter by
USB cable (equipped by user). Or take out the battery, and use
the corresponding charger to charge the battery (equipped by user).
The red indicator light is on during charging, and green light is on
after the battery is fully charged.
10. Operating examples
Take time-lapse photography as an example:
9. Initialization
Place Still
In boot-up state, long press for 1 second to make the motor
stop working, the indicator light shall flash for three times.
Triple tap function button, place it on a still
surface after the indicator light is on, and keep
it in a static state as shown in the right picture:
Initialization succeeds if the indicator light
restores to flashing for three times.
(1)
(2)
(3)
When the initialization failed, the LED indicator will flash quickly, repeat step (2) & (3) to reinitialize.
Micro port
USB data cable
USB port
(1)Install the battery, single tap function button
to power on.
(2)Triple tap function button to access the
menu.
Access to the
next menu
or
confirm
Turn up to select
Turn down to select
Turn down to select
Return to the
previous menu
or
exit
Function
button
How to use Summon
8
Introduction of the joystick
under menu mode
(1)There is small angular deviation between tilting angle and
horizontal line after boot-up.
(2)There is small angular deviation between rolling angle and
horizontal line.
(3)Under lock mode, panning angle drifts.
Initialization is required in these cases:
Initialization steps: