FeiYu Tech SUMMON User Manual - page 8
Reset the tilting axis of the gimbal to initial
orientation and initial mode
Operation
Double tap
Single tap
Function
Explanation
Panning Mode / Lock Mode
Panning and Tilting Mode
Triple tap
Under panning and tilting mode, single tap to switch
to lock mode
Access camera menu
Control camera menu by the joystick
( Please refer to “Joystick” )
Single tap to switch between panning mode and
lock mode
Quadruple tap
Reset
Operation instructions of function button
3. Introduction of photographing
and shooting
Photographing
Switch to camera mode by
“Camera/Record switchover button”.
Single tap “Camera/Record button” to photograph.
Special modes:
Photo Burst / Scheduled picture
4. Introduction of operating mode
Shooting
Switch to record mode by
“Camera/Record switchover button”.
Single tap
“Camera / Record button” to start recording and press this
button again to stop recording.
Special mode:
Slow Motion
Timelapse
Automatically take a picture in the set time interval, panning axis moves by the set
horizontal speed (or tilting axis moves by the set vertical speed), and automatically
compose a video after shooting.
( Please refer to
“Actual Operations” for detailed operations )
Working mode
Other functions
Panning mode
The camera is allowed to pan left or right.
Vertical tilts or rolls are restricted.
Panning and Tilting mode
The camera is allowed to pan left or right
and tilt up and down. Rolls are restricted.
Lock mode
The camera stays in its current orientation.
All panning, tilting and rolls are restricted.
Reset
Reset the tilting axis to initial
orientation and initial mode.
Standby
In standby mode, keep in power-up
state, the motor stops working, the
indicator light flashes for three times,
and single tap again to wake it up.
How to use Summon
6
Camera / Record
switchover button
Camera / Record
button
Single tap again to wake it up, or triple tap to
initialize ( Please refer to “Initialization”)
Long press
for 1 second
Standby