Fezz Audio Silver Luna Prestige User Manual - page 11
11
FIRST POWER-UP AND GETTING STARTED ______________________
Make sure that all of your wiring is connected in accordance with the information as
provided above on page 9 of this manual.
Select the source of signal using the rotary selector switch located on the front panel.
Set the volume control to minimum. Turn on the mains power of the Titania
amplifier – the vacuum tubes shall begin to glow. Make sure that the sound source is
turned on, playing, and then gradually increase the volume level by turning the
potentiometer.
The correct ‘Switch-ON’ (start-up) sequence for the individual devices:
First the Signal Source then the Fezz Audio Silver Titania amplifier.
The correct ‘Switch-OFF’ (shutdown) sequence for the individual devices:
First the Fezz Audio Titania amplifier and then the Signal Source.
Conduct a measurement of the BIAS and, if necessary, adjust it in accordance with
the instructions as presented below on page 12 of this manual.
The operation of the amplifier narrows down to adjusting the volume potentiometer
VOLUME and selecting an audio signal source via rotation of the SOURCE switch.