Fezz Audio Silver Luna Prestige User Manual - page 7
7
INSTALLATION OF THE VACUUM TUBES
Place the Titania amplifier on a stable surface. Carefully remove the vacuum tubes
from their packaging and install them in the appropriate sockets, as shown below,
and adhering to the numbering scheme as identified on the packaging. Please pay
attention to the diameter of the socket and to the appropriate orientation of the
vacuum tube pins.
The pins in the base of each of the vacuum tubes are “coded”, and this has the result
that the insertion of the vacuum tube into the socket is possible only in one correct
and appropriate orientation. If, whilst inserting the vacuum tube you sense
resistance, and you can not push the tube into the socket, please check the orientation
of its pins, rotate the tube to the correct position and try again.
WARNING ! Excessive force may damage the socket and/or the pins
of the vacuum tube.