Freedom Concepts AS 2000 Owner's manual - page 5
K
4
S T R A P S , H A R N E S S E S A N D F O O T P L A T E S
F
A
B
D
D
J
K
B
C
SEAT BELT &
NEOPRENE ANKLE
STRAP ADJUSTMENT
1. Loop strap as shown and
pull (A) to tighten to
desired length.
2. To close, push buckle (B)
into lock clasp (C).
3. To release, squeeze buckle
teeth (B) from side of
lock clasp (C) and pull out
buckle strap.
RIGID AND NEOPRENE
VELCRO STRAPS
Straps help keep the rider’s
feet irmly in place.
1. Velcro foot straps loop
through the ring (D).
2. Pull to tighten and then
press strap together so
Velcro can lock in place.
3. To remove foot, simply
peel apart Velcro straps.
TOE-UP PULLEY
TENSION ADJUSTMENT
The position on the toe-up
pulley rope can be easily
adjusted by simply loosening
the tension on the rope lock
(F) and shifting it’s position
up or down the rope to
the desired location. Once
determined, tighten the
tension back on the rope
lock. Then double-check the
position of feet
and make any
necessary minor
adjustments by
repeating the
process.
Straps, Harnesses and Foot Plates (Operations)
To ensure the bike rider is safely secured, please adjust the seat,
straps, and harnesses to the proper settings for the individual.
FOOT PLATE
ADJUSTMENTS
Our Neoprene foot plates
allow for quick and easy
adjustments to properly
match the individual’s hip to
foot ratio. Loosen the four
foot plate screws (J) and shift
the foot plate (K) forward or
backwards. Once the desired
position is determined, re-
tighten the screws in
place to the pedal
base.