Gaggenau BSP 220 Instruction Manual - page 17
17
3
Set the desired cooking time using the rotary
selector.
4
Press
I
to start.
The appliance starts. The timer menu is closed. The
settings for temperature, heating mode, elapsing time
and cooking time end are shown in the display.
During the last minute of the cooking time the
remaining time is displayed in an enlarged format.
The appliance switches off after the cooking time has
elapsed. The
6
symbol flashes and a signal sounds.
The signal stops when you touch the
™
symbol, open
the appliance door, or switch the function selector
to 0.
Changing the cooking time:
Call up the timer menu. Use
C
to select the
6
"Cooking time" function. Change the cooking time
using the rotary selector. Press
I
to start.
Clearing the cooking time:
Call up the timer menu. Use
C
to select the
6
"Cooking time" function. Clear the cooking time with
Ž
. Return to normal operation with
'
.
Cancelling the entire operation:
Set the function selector to 0.
Note: You can also change the heating mode and
temperature during the cooking time.
End of cooking time
You can delay the cooking time end to a later time.
Example: it is 14:00. The dish requires a cooking time
of 40 minutes. You want it to be ready at 15:30.
Enter the cooking time and delay the cooking time end
until 15:30. The electronics system calculates the start
time. The appliance starts automatically at 14:50 and
switches off at 15:30.
Bear in mind that food which spoils easily should not
be left in the cooking compartment for too long.
Delaying the cooking time end
You have set the heating mode, temperature and
cooking time.
1
Touch the
M
symbol.
2
Use
C
to select the
5
"Cooking time end"
function.
3
Set the desired cooking time end using the rotary
selector.
4
Press
I
to start.
The appliance switches to standby. The heating mode,
temperature, cooking time and cooking time end
appear in the display. The appliance starts at the
calculated time and switches off automatically when
the cooking time has elapsed.
Note: If the
6
symbol flashes: You have not set the
cooking time. Always set the cooking time first.
Once the cooking time has elapsed, the appliance
switches off. The
5
symbol flashes and an audible
signal sounds. The signal stops early if you touch the
™
symbol, open the appliance door, or set the
function selector to 0.
To change the cooking time end:
Call up the timer menu. Use
C
to select the
5
&RRNLQJWLPH
&RRNLQJWLPHHQG