Gallagher T10 Installation Note

Part Number: 3E2453 R1  |  

1   

Installation Note  |  Gallagher T10 Mifare Reader

Installation Note

Gallagher T10 Mifare Reader

The Gallagher T10 Mifare Reader

The Gallagher T10 Mifare reader is a smart card proximity reader.  It can 

be installed as either an entry reader or exit reader.

The reader can read Mifare DESFire EV1, Mifare Plus and Mifare Classic 

cards.

The reader sends information to the Cardax FT Controller and acts upon 

information sent from the Cardax FT Controller.  The reader itself does not 

make any access decisions.

The Gallagher T10 Mifare reader uses the “Cardax IV Reader” 

communications protocol to communicate with the Cardax FT Controller.

This equipment contains components that can be damaged by 

electrostatic discharge.  Ensure both you and the equipment are 

earthed before beginning any servicing.