Gallagher T10 Installation Note - page 7

Part Number: 3E2453 R1  |  

7   

Installation Note  |  Gallagher T10 Mifare Reader

Connecting to the Cardax FT Controller 3000-4R or 3000-8R

The Cardax FT Controller 3000-4R can interface up to four Gallagher T10 

Mifare readers into the Cardax FT Command Centre system.  The Cardax 

FT Controller 3000-8R can interface up to eight Gallagher T10 Mifare 

readers into the Cardax FT Command Centre system.

The ports to which the Gallagher T10 Mifare reader can connect are set up 

as groups, as follows:

Two groups (numbered 1 and 2) on the Controller 3000-4R, and

•

Four groups (numbered 1 to 4) on the Controller 3000-8R

•

Each group provides connection for two Gallagher T10 Mifare readers.  

Refer to the following diagram for the location of the ports on the Cardax 

FT Controller 3000-8R.

Note:  Even though there are only two groups of ports on the Cardax FT 

Controller 3000-4R, they are located in the same position.