Gardena AquaContour automatic 8133 Operating instructions manual - 6. Putting Into Storage
16
GB
6. Putting into Storage
The storage location must not be accessible to children.
1. Remove batteries from the Large-Area Irrigation AquaContour
automatic.
The programmes remain unchanged.
2. Store the Large-Area Irrigation AquaContour automatic in a dry
place protected from frost.
Important !
Return spent batteries to one of the sales outlets or dispose
of batteries via your municipal recycling collection centre.
Only dispose of battery once discharged.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important: Make sure that the unit is disposed of via your
municipal recycling collection centre.
7. Maintenance
If the Auto LED 1 and Set LED 1 start flashing every 8 seconds,
the batteries have to be replaced.
The programmes remain unchanged.
1. Turn the battery cover
C
on the bottom of the Large-Area
Irrigation AquaContour automatic anticlockwise 1 and pull
out carefully 2 (bayonet coupling).
2. Remove battery holder
D
and insert 4 batteries (1.5 V round
cells type IEC LR14).
When doing so, ensure correct polarity + / -.
3. Re-insert battery holder
D
.
4. Fit battery cover
C
in reverse order.
Test battery :
v During “sleep mode” (the green Auto LED
6
does not light up)
press the two buttons “+” button
2
and “-” button
3
for
4 seconds.
Both green Auto LED light up : batteries have still enough capacity.
Both red Auto LED light up : replace batteries.
1. Turn the dirt filter
E
anticlockwise 1 and pull out carefully 2
(bayonet coupling).
2. Clean dirt filter
E
under clean running water.
3. Refit dirt filter
E
in reverse order.
Replace batteries :
C
D
E
Storage /
Overwintering :
Clean dirt filter :
Disposal :
(in accordance with
RL 2002 / 96 / EC)