Gardsman CTC-1052RV User Manual - page 20
17
a short beep will be heard via the
phone set.
Step 2: Press the Pendant Button within 20
secs.
)
Learning can only be completed
within the signal reception range of
CTC-1052RV.
)
If no signal is received within 20
sec, CTC-1052RV will emit a long
beep and automatically returns to
Programming mode.
Step 3: CTC-1052RV will emit 2 beeps to
indicate that Pendant #1 is learnt-in
successfully.
)
Adding a Pendant for a second
time is prohibited unless it is
removed from the system first.
)
If one long beep is emitted
instead of 2 beeps, it indicates:
9
The device has already been
learnt-in.
9
Another device has been learnt-
in before.
N
N
O
O
T
T
E
E
>
>
)
WTRV is not able to learn-in under
this command.
Command 92
Learn-In Pendant #2
N
N
O
O
T
T
E
E
>
>
)
This command is not available in
Remote Programming Mode.
z
Only one Pendant can be learnt into CTC-
1052RV by using Command #92.
z
For learning Pendant #2:
Step 1: Enter 92 + # on the phone set, then
a short beep will be heard via the
phone set.
Step 2: Press the Pendant Button within 20
secs.
)
Learning can only be completed
within the signal reception range of
CTC-1052RV.
)
If no signal is received within 20
sec, CTC-1052RV will emit a long
beep and automatically returns to
Programming mode.
Step 3: CTC-1052RV will emit 2 beeps to
indicate that Pendant #2 is learnt-in
successfully.
)
Adding a Pendant for a second
time is prohibited unless it is
removed from the system first.
)
If one long beep is emitted
instead of 2 beeps, it indicates:
9
The device has already been
learnt-in.
9
Another device has been learnt-
in before.
N
N
O
O
T
T
E
E
>
>
)
WTRV is not able to learn-in under
this command.
Command 93
Learn-In Silent Pendant
N
N
O
O
T
T
E
E
>
>
)
This command is not available in
Remote Programming Mode.
z
Only one Silent Pendant can be learnt into
CTC-1052RV by using Command #93.
z
For learning Silent Pendant:
Step 1: Enter 93 + # on the phone set, then
a short beep will be heard via the
phone set.
Step 2: Press the Pendant Button within 20
secs.
)
Learning can only be completed
within the signal reception range of
CTC-1052RV.
)
If no signal is received within 20
sec, CTC-1052RV will emit a long
beep and automatically returns to
Programming mode.
Step 3: CTC-1052RV will emit 2 beeps to
indicate that Silent Pendant is
learnt-in successfully.
)
Adding a Pendant for a second
time is prohibited unless it is
removed from the system first.
)
If one long beep is emitted
instead of 2 beeps, it indicates:
9
The device has already been