Garland MULE 341 G Instruction Manual - page 36

English

36/84

English

37/84

Clean the lower part of the transmission box around 

the tills and the protecting shield with a brush. Never 

use water or other liquids to clean the machine. Clean 

the rest of the machine with a damp cloth.

8.2. PERIODIC MAINTENANCE

 Perform regular inspections of the machine in 

order to ensure efficient operation of the machine. 

For complete service maintenance, we recommend to 

take the machine to your service technician.

8.2.1. AIR FILTER

The dirt in the air cleaner will cause a reduction in the 

performance of the machine. Check and clean this 

element.

 Note: The engine should never function without 

the air filter installed.

8.2.2. CARBURETOR ADJUSTMENT

Carburetor adjustment is complicated, and only the 

technical maintenance service must do them

8.2.3. FUEL FILTER

The fuel tank is equipped with a filter. It is at the end 

of the suction pipe and can be removed with the help 

of a hook of wire.

Check the fuel filter regularly. Do not allow dirty in the 

fuel tank to prevent the filter is dirty. A dirty filter will 

make it more difficult to start the engine and cause 

malfunctions or stop it.

Check fuel. If you see dirty replace. 

If the inside of the fuel tank is dirty you can clean it 

with gasoline.

8.2.4. CHECKING THE SPARK PLUG

When it comes to starting a machine, the most 

common problems are produced by a dirty spark plug 

or one in poor condition. Clean and check the spark 

plug regularly.

Check that the electrode gap is correct (0.6 - 0.7 

mm).

8.2.5.CLEANING THE CYLINDER FINS

The cylinder fins are responsible for the cooling of the 

engine due to its contact with the air. These fins must 

be clean and without any material including those that 

limit the flow of air.

8.2.6. TRANSMISSION OIL

The transmission of this machine is watertight 

and it has oil in its interior that does not need 

maintenance or substitution. Do not try and change 

the transmission oil.

Should you observe grease leakages, we recommend 

you take the machine to an after sales service for a 

revision.