Garmin Dash Cam 10 Owner's Manual - Getting Started
Getting Started
WARNING
See the Important Safety and Product
Information guide in the product box for product
warnings and other important information.
Installing a Memory Card
The device supports microSD™ and microSDHC
memory cards.
1
Insert a memory card into the slot on the
device.
2
Press it in until it clicks.
Connecting the Device to Vehicle Power
Before you can use or turn on the device, you
must install a memory card.
You can power and charge the device using
vehicle power.
TIP: You should fully charge the device before
you use the device on battery power.
1
With the vehicle off, plug the power cable
into a power outlet in your vehicle.
2
Plug the other end of the power cable into
the USB port on the device.
3
Press the device
À
onto the suction cup
Á
.
4
Press the suction cup to the windshield, and
flip the lever
back toward the windshield.
2