Garmin Dash Cam 10 Owner's Manual - Video Recording
Video Recording
The device immediately begins recording video
when it turns on, and it continues recording,
overwriting the oldest, non-protected videos until
it turns off. While recording, the LED below the
screen is solid red.
NOTE: The device records continuously until it
turns off.
Protecting a Video Recording
By default, the device uses a sensor to
automatically detect accidental collisions and
protect the three video files during, before, and
after the detection. At 1080p, the video files are
approximately four minutes long.
NOTE: You must calibrate the event detection
sensor from the settings menu after you install
the device in your car (page 7).
You can also manually protect video files at any
time.
While recording, select .
The device protects the current, previous,
and next video files.
Taking a Picture
You can take still photographs with this device.
While recording, select .
The device takes a photo and saves it to the
memory card.
Viewing Videos and Photos
NOTE: The device stops recording video while
you view videos or photos.
1
Select .
2
Select an option:
• Select Video to view videos.
• Select Snapshot to view photos.
3
Select a video or photo to view.
4
Select .
4