Garmin Edge 1000 Quick Start Manual - page 22
Creating a Round-Trip Route
The device can create a round-trip route based on a specified
distance and a starting location.
1
From the home screen, select Where To? > Round-Trip
Routing
.
2
Select Distance, and enter the total distance for the route.
3
Select Start Location.
4
Select an option:
• Select Current Location.
NOTE:
If the device cannot acquire satellite signals to
determine your current location, the device prompts you
to use the last known location or to select the location on
the map.
• Select Use Map to select a location on the map.
5
Select Search.
TIP:
You can select to search again.
6
Select a route to view it on the map.
TIP:
You can select and to view the other routes.
7
Select RIDE.
Route Settings
Select > Activity Profiles, select a profile, and select
Navigation
> Routing.
Routing Mode
: Allows you to select an activity for the device to
calculate your route (
Selecting an Activity for Route
Calculation
).
Calculation Method
: Allows you to select the calculation
method to optimize your route.
Lock On Road (requires routable maps)
: Locks the position
icon, which represents your position on the map, onto the
nearest road.
Avoidance Setup (requires routable maps)
: Allows you to
select the road type you want to avoid.
Recalculation (requires routable maps)
: Allows you to select
the recalculation method when you deviate from the route.
Selecting an Activity for Route Calculation
You can set the device to calculate the route based on activity
type.
1
From the home screen, select > Activity Profiles.
2
Select a profile.
3
Select Navigation > Routing > Routing Mode.
4
Select an option to calculate your route.
For example, you can select Tour Cycling for on-road
navigation or Mountain Biking for off-road navigation.
Map Settings
Select > Activity Profiles, select a profile, and select
Navigation
> Map.
Orientation
: Sets how the map is shown on the page.
Auto Zoom
: Automatically selects a zoom level for the map.
When Off is selected, you must zoom in or out manually.
Guide Text
: Sets when the turn-by-turn navigation prompts are
shown (requires routable maps).
Map Visibility
: Allows you to set advanced map features.
Map Information
: Enables or disables the maps currently
loaded on the device.
Changing the Map Orientation
1
Select > Activity Profiles.
2
Select a profile.
3
Select Navigation > Map > Orientation.
4
Select an option:
• Select North Up to show north at the top of the page.
• Select Track Up to show your current direction of travel at
the top of the page.
• Select 3D Mode to display the map in three dimensions.
Advanced Map Settings
Select > Activity Profiles, select a profile, and select
Navigation
> Map > Map Visibility.
Map Visibility Mode
: Auto and High Contrast have preset
values. You can choose Custom to set each value.
Zoom Levels
: Sets map items to draw or appear at or below
the selected zoom level.
Text Size
: Sets the text size for map items.
Detail
: Sets the amount of detail shown on the map. Showing
more detail may cause the map to redraw more slowly.
Shaded Relief
: Shows detail relief on the map (if available) or
turns off shading.
Purchasing Additional Maps
Before purchasing additional maps, you should determine the
version of the maps that are loaded on your device.
1
From the home screen, select > Activity Profiles.
2
Select a profile.
3
Select Navigation > Map > Map Information.
4
Select a map.
5
Select .
6
Go to
http://buy.garmin.com
, or contact your Garmin dealer.
Finding an Address
You can use the preloaded Garmin Cycle Map (if available) or
optional City Navigator® maps to search for addresses, cities,
and other locations. The detailed and routable maps contain
millions of points of interest, such as restaurants, hotels, and
auto services.
1
From the home screen, select Where To? > Search Tools >
Addresses
.
2
Follow the on-screen instructions.
TIP:
If you are unsure of the city, select Search All.
3
Select the address, and select RIDE.
Finding a Point of Interest
1
From the home screen, select Where To? > Search Tools >
POI Categories
.
2
Select a category.
TIP:
If you know the name of the business, select All POIs >
to enter the name.
3
If necessary, select a subcategory.
4
Select the location, and select RIDE.
Finding Nearby Locations
1
From the home screen, select Where To? > .
2
Select an option.
For example, select A Recent Find to search for a
restaurant near the address you recently searched for.
3
If necessary, select a category and subcategory.
4
Select the location, and select RIDE.
Topographical Maps
Your device may include topographical maps or you can
purchase them from
http://buy.garmin.com
. Garmin
recommends that you download BaseCamp™ to plan your
routes and activities using topographical maps.
Navigation
11