Garmin GPSMAP 1000 Series Owner's Manual - Combinations
2
Select a track.
3
Select
Delete
.
Deleting All Saved Tracks
Select
Nav Info
>
Manage Data
>
Clear User Data
>
Saved
Tracks
.
Retracing the Active Track
The track currently being recorded is called the active track.
1
Select
Nav Info
>
Tracks
>
Follow Active Track
.
2
Select an option:
• Select the time the active track began.
• Select
Entire Log
.
3
Review the course indicated by the colored line.
4
Follow the colored line, steering to avoid land, shallow water,
and other obstacles.
Clearing the Active Track
Select
Nav Info
>
Manage Data
>
Tracks
>
Clear Active
Track
.
The track memory is cleared, and the active track continues
to be recorded.
Managing the Track Log Memory During Recording
1
Select
Nav Info
>
Tracks
>
Active Track Options
.
2
Select
Record Mode
.
3
Select an option:
• To record a track log until the track memory is full, select
Fill
.
• To continuously record a track log, replacing the oldest
track data with new data, select
Wrap
.
Configuring the Recording Interval of the Track Log
You can indicate the frequency at which the track plot is
recorded. Recording more frequent plots is more accurate but
fills the track log faster. The resolution interval is recommended
for the most efficient use of memory.
1
Select
Nav Info
>
Tracks
>
Active Track Options
>
Record
Interval
>
Interval
.
2
Select an option:
• To record the track based on a distance between points,
select
Distance
>
Change
, and enter the distance.
• To record the track based on a time interval, select
Time
>
Change
, and enter the time interval.
• To record the track plot based on a variance from your
course, select
Resolution
>
Change
, and enter the
maximum error allowed from the true course before
recording a track point.
Stopping Navigation
While navigating, from the Navigation or Fishing chart, select
an option:
• Select
MENU
>
Stop Navigation
.
• When navigating with Auto Guidance, select
MENU
>
Navigation Options
>
Stop Navigation
.
Synchronizing User Data Across the Garmin
Marine Network
NOTICE
Before you synchronize the user data across the network, you
should backup your user data to prevent possible data loss. See
.
You can share waypoints, tracks, and routes with all compatible
devices connected to the Garmin Marine Network (Ethernet)
automatically.
NOTE:
This feature is not available on all models.
Select
Nav Info
>
Manage Data
>
User Data Sharing
>
On
.
If a change is made to a waypoint, track, or route on one
chartplotter, that data is synchronized automatically across all
chartplotters on the Ethernet network.
Deleting All Saved Waypoints, Routes, and
Tracks
Select
Nav Info
>
Manage Data
>
Clear User Data
>
All
>
OK
.
Combinations
The Combination screen shows a combination of different
screens at the same time. The number of options available on
the Combination screen depends on the optional devices you
have connected to your chartplotter and whether you are using
premium maps.
Selecting a Combination
1
Select
Combinations
.
2
Select a combination.
Customizing a Combination Screen
1
Select
Combinations
.
2
Use the arrow keys to highlight a Combination screen.
3
Select
Configure
.
4
Select an option:
• To change the name, select
Name
, and enter a new
name.
• To change the arrangement of the information on the
screen, select
Change Layout
, and select a new layout.
• To change the information shown on the screen, select
Change Function
, and select new information.
• To customize the data shown on the screen, select
Overlay Numbers
(
).
• To resize the information areas shown on the screen,
select
Resize Combination
.
Creating a Custom Combination Screen
You can create a custom Combination screen to suit your
needs.
1
Select
Combinations
>
Add
.
2
Select a layout.
3
Select the information to display in the combination, and
select
Done
.
4
Use the arrow keys to adjust the screen split, and select
Done
.
5
Enter a name for the combination, and select
Done
.
Deleting a Combination Screen
1
Select
Combinations
.
2
Use the arrow keys to highlight a Combination screen.
3
Select
Configure
>
Remove Combination
.
Sonar
When properly connected to an optional Garmin sounder
module and a transducer, your compatible chartplotter can be
Combinations
13