GOLDEN STATE INSTRUMENT CO GS-16CH264 User Manual - page 15
29
2-2 SEARCH SETUP
Item
Description
Event Search
Event search menu
Time Search
Enter time search menu
2-2.1 EVENT SEARCH
The DVR automatically records events with type, time and channel information included. If there
is recording data for an event, a yellow signal
will be shown on the left side of time
information. Rest your cursor under the line and press “enter”, or left click your mouse to
playback the recording data.
P.S. Event Records will still be generated even when hard disk is not installed or the
record function is not activated. However, the data can’t be viewed after selecting it.
30
Item
Description
Criteria
Setup conditions of event search
Page
Switch between pages of events
Date/Time
Date/time when event occurred.
Event type, defined as following
MOTION
Motion Detected
Video Loss
Video Loss
Remote Login
user log-in over the network
Remote Logout
user log-out over the network
Power On
DVR Power on
HDD Full
HDD Space FULL
HDD Error
Detect HDD error
Event Type
Reboot
DVR Reboot
Info
The channel where event occurs or login user
2-2.1.1 CRITERIA SETUP FOR EVENT SEARCH
The amount of events can be numerous. Therefore, you can facilitate event sorting by setting
up “criteria”. Setup “start time” and “end time” for event search, then the search result will be
limited to this specific period of time. Only checked events and channels will be sorted in event
search.