GOLDEN STATE INSTRUMENT CO GS-16CH264 User Manual - page 9
17
1-6.4 Mail Setup
When an event occurs (VLOSS, MOTION), an email will be sent to the receiver’s account
automatically. If you select Motion, you will be emailed a snapshot of the event.
Item
Description
Enable E-mail Notification
Check the box to enable/disable E-mail Notification function.
SMTP Server
Enter to set up SMTP Server Address
User Name
Enter to set up User Name.
Password
Enter to set up Password.
Sender E-mail
Enter to set up e-mail address of receivers.
Trigger Event
Enter to select events to send out E-mail notifications when below
circumstances happen: Motion, Sensor and Vloss (Video Loss).
Receiver E-mail
Enter to set up e-mail addresses for up to 10 receivers individually.
18
1-7 PTZ & RS485 SETUP
The DVR allows users to control PTZ functions of your camera. To enable PTZ function, the 485
cable should be connected to the RS-485 port of DVR.
Item
Description
Enable PTZ
Click the box to Enable/Disable PTZ function for each channel.
Protocol
Set up the protocol of PTZ cam. The supported protocols are
PELCO-P, PELCO-D, KND, LI-LIN, SAMSUNG, LG, AVTECH.
PTZ ID
Click or press ◀
▶ to set up PTZ ID. The valid ID value is from 1
to 64.
Baud Rate
Select Baud Rate for PTZ from 2400, 4800, 9600,19200
RS-485 ID
Select RS-485 ID from 1 to 64
RS-485 Baud Rate
Select RS-485 Baud Rate from 2400. 4800, 9600,19200
Keyboard
Select Keyboard.
Note:4CH DVR will display 4 channels. 8CH DVR will display 8 channels.