Good Energies B-CURE LLLT-808 Operating Instructions Manual - page 7
3.2 Adjusting the Timer on the LCD Screen
Press the button (No. 2) on the right (+) or on the left (-) for defining treatment time.
The timer can be adjusted by intervals of 30 seconds.
Adjust the time as required for the treatment as recommended in the Dosages Table on Page 14.
3.3 Starting a Treatment
Operation can be started in two ways:
1. Directly applying device to area of treatment:
Operating by pressure – to be used only if there is no exposed tissue or open wound:
Place the area for pressure operation (No. 5) on the area to be treated and gently press the device onto the skin.
The electronic micro-button will operate the laser automatically. To stop the operation, simply move the device out
of contact with the skin
2. Operating by pressing treatment start button:
Press the treatment start button (No. 4) located on the left-hand side of the device to operate it. Releasing the
treatment start button will immediately stop the operation.
CAUTION: Never point the laser beam at anyone’s eyes!
7
|
B-CURE
®
LASER LLLT-808