Good Energies B-CURE LLLT-808 Operating Instructions Manual - page 9
of
36
4. End of Treatment and Switching the Device Off
If the time planned for a treatment was not fully used, the timer will show the remaining treatment time. The
■
remaining treatment time will be shown when the device is next switched ON.
To reset any time left from a previous treatment to zero, press the main operating button (No.1) for more than
■
2 seconds when switching the device on.
To switch the device off, press the main operating button for 2 seconds until a beep is sounded and nothing is
■
shown on the display (the
LCD
screen will be cleared completely).
9
|
B-CURE
®
LASER LLLT-808