Holland Grill companion Instruction Manual - Assembling Your Grill
BH212 MG-2
MG2-4
COMPANION GRILL OWNERS MANUAL
ASSEMBLING YOUR GRILL
The Holland Grill “Companion” model requires very little assem-
bly. The unit is mostly complete right out of the box. The only
items that require assembly are the lid
lifting handle and spring. The regulator is installed per grill use
and removed when the grill is not in use.
Tools Needed for Assembly:
1. Phillips screwdriver
2. 3/8” nutdriver or wrench
Contents List:
1. Grill Assembly
2. Drip Pan
3. Cooking Grid
4. Regulator/Gas Valve
5. Handle Bracket
6. Handle Spring
7. Grease Pan
8. Disposable Grease Pan Liner
9. Chip Tray
10. Hardware Bag
11. Manual/Documents
ASSEMBLY
1. On a clean, flat surface, such as a table top, select the
following parts:
1. Grill assembly
5. Handle bracket
6. Handle spring
(2) #10-24 x 1/2” SS Phillips machine screws
(2) #10-24 SS hex nuts
(2) #10 SS star lockwashers
Open grill lid. Using the above hardware, attach handle bracket
to lid. Refer to Fig. 2. After bracket is secured to lid, flex spring
handle onto the bracket end pins. Refer to Fig.3.
2. Locate the drip pan and place it into the grill body with drain
pipe on the left. Make sure drain pipe passes through the body
bottom and the pan mounting flanges are resting on the inset
flange of the grill body.
Fig. 1
Fig. 2
Fig. 3