Home Advances Solar 6RHAS100LGR User Manual - page 7
7
mOuntinG tHe SOLAR pAneL
If you are mounting the solar panel separate
from the camera/light body, see Fig 6 for how
to separate the solar panel from the Solar LED
security light [01].
Unscrew the waterproof cover on the Solar
LED security light and remove.
Unscrew the solar panel. Carefully pull out
the cord knob and detach the solar panel.
FIG. 6
1
2
waterproof
cover
solar panel
[01]
Follow the instructions in Fig. 7 to mount the solar panel.
Place the solar panel mounting bracket [03] in the location where you have chosen to install it.
Using a pencil or felt tip marker, mark the placement of the two holes of the solar panel mounting bracket [03]
on the wall. Then remove the mounting bracket [03].
If two wall anchors [05] are required, use a drill bit suitable for the type of surface you are drilling and drill two
pilot holes.
Gently hammer the two wall anchors [05] into the two holes.
Securely fasten the solar panel mounting bracket [03] to the wall with two long screws [04].
Attach the solar panel to the solar panel mounting bracket [03] with the two short screws [06].
Securely tighten the two short screws [06].
FIG. 7
1
[04]
[04]
[03]
[03]
[05]
[06]
[06]
2
5
6
7
solar panel
3
[05]
4
1
1
3
4
6
5
7
2
2