1 video doorphone system with image memory and intercom owner’s manual installation and operation before installing or, operating the system, please read this manual model: vi 450
2 section page important safety instructions………………….........................….......3 introduction............................…………….............................................4 system contents........................……………..........................................4 features.............................
3 read instructions – all the safety and operating instructions should be read before operating this equipment. These instructions should be retained for future reference heed warnings – all warnings on the equipment and in the operating instructions should be adhered to. All instructions regarding ...
4 thank you for purchasing the home sentinel video door phone entry system. This model allows you to identify and communicate with callers at the door, from the security and convenience of any room in your home. Visitors activate the system by pressing a call button on the outdoor camera, which soun...
5 • use only the power adapter supplied with the system. The use of any other power adapter may cause damage to the system which is not covered under warranty • keep it dry. If water should get on it, wipe it off immediately. Water contains minerals that can corrode electronic circuits • do not use ...
6 vi 450 monitor description 1. Pin socket 2. Wiring terminal 3. Dc power socket 4. 4“ b/w flat crt screen 5. Power led 6. Volume tuner 7. Broadcasting and intercom call button 8. Lock release button 9. Audio & video monitoring button 10. Brightness control 11. Memory status led 12. Sharpness contro...
7 6. Volume control use to adjust chime volume level and voice level 7. Broadcasting & intercom call button use to initiate the intercom function (a doorbell chime will be heard ) 8. Lock release button press to remotely unlock/open your door (requires electric deadbolt, optional) 9. Audio & video m...
8 ca 455 ca 456 ca 456 ca 456 mo451 door release monitor + - please note: turn off the power to all units being used before connecting or disconnecting cables 1. Choose a suitable location, then fasten the wall mount plate to the monitor unit using the two wall mounting screws provided. 2. Connect t...
9 1. To enter set-up mode for on-screen programming press and hold the left button( broadcasting and intercom button )for 2 seconds when the handset is “ on the hook “ . You will hear a chime before entering set-up mode. 2. Press the left and right button on the monitor to select the item, and the m...
10 3. Inspect new memory • slow flash on the memory status led indicates memory is captured • press and hold the middle button for 2 seconds, you will hear a chime before entering the inspection mode • press left & right button to scroll pictures • reset handset or when visitor calls this will end t...
11 identification, installation, and set-up procedure for an expansion monitor station mo 451 4“ b/w flat crt screen ac adapter 1. Pin socket 6 pin socket located on the wall mount plate is the connecting terminal for the expansion monitor 2. Wiring terminals terminals used to connect to the main mo...
12 identification, installation, and set-up procedure for an expansion monitor station mo 451 6. On line w/door unit led indicates other monitor unit is on line to camera unit 7. Brightness control rotate to adjust the picture brightness of image 8. Sharpness control rotate to adjust sharpness of im...
13 identification, installation, and set-up procedure for an expansion monitor station mo 451 • when the monitor unit is on-line with the camera unit, you can press the broadcasting/intercom button to invite other monitor units for conversation with the camera unit 2. Audio & video monitoring • oper...
14 identifying the parts 1. Microphone this highly sensitive microphone will pick up sound within the effective operating range of the camera 2. Linking wires to hook unit up with main monitor unit 3. Ccd camera delivers a clear detailed picture to the monitor 4. Microphone sensitivity adjust turn t...
15 installation and set-up procedure for adding another outdoor camera ca 455 1. Connect the two wires “ monitor “ on the camera to the 2 terminals on the monitor, marked dr2/cam1. 2. Enter the system set-up mode on the main monitor unit as outlined above. Select the dr2/cam1 item. Alter status to a...
16 before requesting service, check the troubleshooting guide to solve the problem problem solution no power ( no picture on monitor) make sure that the ac plug is firmly inserted into the ac outlet make sure that the dc power socket is firmly inserted into the mounting monitor unit system is on, bu...
17 monitor unit power source: full range switching power ac 100v (0.7a) ~ ac 250v (0.35a) dc 18v, 12v, 5v power consumption: 70w crt screen: 4" b/w flat type tv system: b/w ntsc resolution: over 420 tv lines conversation time: 90 seconds conversation system: handset with 2 way full duplex audio inte...
18 home sentinel warrants this home security product (“the product”) to be free from defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover any expenses incurred in the removal and reinstallation of the product. This warranty is offered t...
19 distributed by: strategic vista corp. 300 alden road, markham ontario, canada l3r 4c1 tel: (905) 946-8589 fax: (905) 947-0138 toll free: 1-888-425-6739 www.Strategicvista.Com.
