Home Sentinel VI 450 Owner's Manual - page 13
13
Identification, Installation, and Set-up Procedure for an expansion Monitor
Station MO 451
• When the monitor unit is on-line with the camera unit,
you can press the Broadcasting/Intercom button to
invite other monitor units for conversation with
the camera unit
2. Audio & Video Monitoring
• Operates the same as the main monitor unit
• If more than one monitor unit is being used then the
main monitor unit will have control of channel switching
3. Broadcasting & Intercom between Monitoring Units
• Pick up the handset and press and hold the left button for
a while to broadcast to all monitor units
• If the other monitor units pick-up the handset, then
the intercom features will be enabled
Identification, Installation and Set-up Procedure for adding a Dome
Camera CA 456
CA 456
Parts Identification
CA 456
Installation
If installed in a small enclosed area,
adjust the microphone sensitivity to a
lower level
Connect the 2 wires from the dome camera
to the DR2 / CAM1 or CAM2 or CAM 3 terminal
on the monitor ( Non Polarity )