I-O Display Systems i-glasses User Manual - page 5
2/5/02
5 of 5
SVGA User Manual
Using the OSD (On-Screen-Display)
The OSD allows the user to make some changes to the way the SVGA Personal
Display works and performs. Changes that can be made through the OSD include:
Brightness, Contrast, Audio Balance, Horizontal Centering, Color Settings, set the
system to 3D (If your unit includes the 3D option), and Resetting the unit to
Original Factory Settings.
1.
SELECT THE OSD FUNCTION
–
Press and hold the power button for about 3 seconds
or until a small window appears in the middle of your screen, as shown below.
Release the button
after the screen appears.
2D On Screen Display
3D On Screen Display
2.
SCROLLING BETWEEN SETTINGS
–Notice that the Brightness Icon is highlighted and
the word Brightness appears just under the icons. Pressing the up/down button allows
you to scroll through all the Main Menu choices.
3.
SELECTING A SETTING TO CHANGE
–Once you have chosen the function you would
like to change, momentarily press the power button to open the submenu window.
4.
CHANGING BRIGHTNESS
–Brightness allows you to make adjustments to the display
brightness. When the Brightness submenu is displayed you may change the setting by
pressing the up/down buttons from 0 to 100%. Once you find a value setting that you
like, you may press the power button to immediately return to your main screen or wait
about 2 seconds and the program will return to your main screen automatically.
Regardless, your new setting takes places immediately after you make the
adjustment.
5.
CHANGING CONTRAST
–Contrast allows you to make adjustments to the display
contrast. When the Contrast submenu is displayed you may change the setting by
pressing the up/down buttons from 0 to 100%. Once you find a value setting that you