I-SENS AutoChek t Owner's Booklet - Control Solution Testing

www.i-sens.com                                                                                                   25 

Control Solution Testing

Insert a test strip into the meter’s test strip port, with the contact 

bars facing upwards.

Gently push the test strip into the port until the meter beeps.   

Be careful not to break the strip while pushing it in. 

The         icon will be displayed on the screen. 

Shake the AutoChek t Control   

Solution vial before each test. 

Remove the cap and squeeze the 

vial to discard the first drop. Then   

wipe the tip with a clean tissue   

or cloth. After the           symbol 

appears on the display, apply the

solution to the narrow edge of the   

test strip until the meter beeps.   

Make sure the confirmation window fills completely.

Caution:

If all the results you get from testing continuously (at least three times)are within the 

range printed on the test strip, the meter and test strips are working properly and you 

may use them for your blood glucose test.

Step 1

Step 2