I-SENS AutoChek t Owner's Booklet - Step 1
of
61
www.i-sens.com 34
Result Data Transmission I
In the “T1” mode, the measured data is sent to
a server immediately after each measurement.
(Refer the Setting the Cellular function On/Off )
After measuring Blood glucose and discard an used test strip,
the meter
will starting the data transfer operation. ‘Snd’ will be appeared
on the screen.
Once the data transfer begins, the progress indication
dash dot (blinking) will be appeared at the bottom of the
screen.
When the meter successfully sent the test result, ‘SUCC ESS’
will be appeared at the bottom of the screen.