I-SERV 8630 Operation Manual - page 18
Version 0.3
Page | 18
Conference Call
Pressing Conference key makes it possible to add a thirds call and establish a conference call.
Conference is always 3 part conference.
REDIAL
The handset doesn’t have a redial list in conventional sense. The handset have a call log which is
grouped in 4 lists, (All, incoming, outgoing missed). The list “Outgoing” can be used for redialing.
Auto Stand-by
The handset automatically returns to standby when no user input is received within a given timeout.
Out of Range
The handset will display “Searching” when the handset is out of range. An audible warning will be
given in the earpiece (If “Coverage warning” is enabled) during call when the user reaches the
maximum range. The warning will be given in such a way, that the user will have time enough to move
back in range, before the call is terminated.
Low Battery
The Handset has visual and audible indicators to warn of low battery condition.
The audible indication is routed to the speaker during standby mode and routed to the earpiece during
call state.
The battery low alert tone will be emitted every 30 seconds.
The Battery status Icon in the display will change to battery low
Battery status
Battery Status Icon
- Battery Full
100 %
- Battery Level 7
90 % to 100 %
- Battery Level 6
79 % to 90 %
- Battery Level 5
68 % to 79 %
- Battery Level 4
56 % to 68 %
- Battery Level 3
44 % to 56 %
- Battery Level 2
32 % to 44 %
- Battery Level 1
20 % to 32 %
- Battery Level low
10 % to 20 %
- Battery empty
0%
Mute
The Mute icon will be turned on when Press mute key during talk mode. The far end cannot hear voice
from the user when the call is muted. Pressing menu/mute key again will cancel mute condition and
Mute icon will be turned off.