I-SERV 8630 Operation Manual - page 23
Version 0.3
Page | 23
Speed Dial/One Touch Dial
The speed dial feature allows the user to assign a speed dial number (2 – 9) to a contact. This enables
the user to call a contact by making a single long key press on one of the number keys (2 – 9) when in
idle. A contact can only be assigned to one speed dial number at a time. The first defined number of
the contact will be dialed when the speed dial key is pressed. This means that if all numbers (Work,
Mobile, Home & Other) for the contact is defined then the Work number will be dialed. If the Work
number is not defined then the Mobile number is dialed etc.
NOTE:
The ‘1’ key is reserved for voicemail. Long key press on ‘0’ is used for starting a normal dial string with
‘+’.
How to setup speed dial
Prerequisite: There must be at least one contact in the contact list.
Steps:
1. Go to the contact list > Move to the contact that you want to assign a speed dial number to.
2. Select “More” > Select “Speed dial”
3. Move to the speed dial number (2 – 9) that you want to assign the contact number to.
4. Select “Add”. The contact name should be appended to the speed dial number.
5. Leave speed dial list by pressing “Hook on” key > Press “Hook on” key to exit “More” menu >
Exit contacts list by pressing “Hook on” key.
How to call a speed dial number
Prerequisite: The handset is in idle and the key lock is not active.
Steps:
1. Make a long key press (> 2 seconds) on a speed dial key that is assigned to a contact. The first
number defined is dialed.