I-SERV 8630 Operation Manual - page 20
Version 0.3
Page | 20
or Left. An audible indication (play back) is given when adjusting the ringer volume. The currently used
ringer melody is used as play back when adjusting the volume.
Ringer mute:
The ringer is switched off when the lowest level is selected in menu “Audio settings→ Ringer volume”.
The ringer OFF icon is displayed in the top bar when the ringer is off.
Ringer melody
The ringer melody can be changed by selecting menu “Audio settings → Ringer melody”. A list of
melodies is displayed when entering the menu. Each displayed melody on the list can be selected by
pressing soft key “Select”. The graphical user interface (radio button) allows the user to choose only
one of a predefined set of options (melodies). Each melody on the list can be played back by selecting
soft key “Play”. The soft key “Play” changes to “Stop” during play back.
Alert volume
The alert volume can be adjusted by selecting menu “Audio settings → Alert volume”. The current
used level is displayed when entering the menu “Alert volume”. The volume can be increased by
pressing navigation key Up or Right. The volume can be decreased by pressing navigation key Down or
Left. The currently used alert melody is used as play back when adjusting the volume.
Alert tone
Different kind of alert tones can be selected. The alert tone is used when the alarm clock occur. The
graphical user interface (radio button) allows the user to choose only one of a predefined set of
options (melodies).
Each melody on the list can be played back by selecting soft key “Play”. The soft key “Play” will change
to “Stop” during play back.
Vibrator
In the vibrator menu different vibrator states can be selected. The options are Off, Vibrate then ring,
Vibrate only, Vibrate and ring.
Key sound
The key sound can be Silent, Click or Tone. A sound is generated on each key press when the key sound
Click or Tone are selected. No key sound will be generated when pressing the keys during “key lock
state” even though one of the key sounds is selected.
Confirmation sound
When the feature “Confirmation sound” is enabled (On), an audible indication is given when an event
succeed or fail. Example: A positive confirmation sound is generated when a new setting is set or an
entry is saved successfully in the phonebook. A negative confirmation sound is generated if the action
fails.
Coverage warning
When the feature “Coverage warning” is enabled (On), then an audible indication is given in the
earpiece when the user is close to maximum range.
Charger warning
When the feature “Charger warning” is enabled (On), then an audible indication will be given when the
handset is correctly connected to the charger.