I-Tech ENP100 User Manual - page 14
V3.0(06198) 14
9/16/2008
Below is command that goes to all clients of same group, one by one.
b) Play: Send ‘Playback’ command manually to group of clients
c) Stop: Send ‘Stop’ command manually to group of clients
d) Message: Instant message editor will pop up. You can select any .txt file or manually type
in text message, then send to group of clients. A news ticker type of OSD will scroll text
from right to left on the bottom of client screen
e) Message Off: Send “Message Off” command to group of clients
f) Volume: It has Mute and 15 levels of volume. Will send volume command manually
g) Video: It has video ON or OFF to turn On/Off client’s screen
h) Options: Less frequent use commands are located here.
- Format: Send format CF card command to client. All files in CF card will be erased.
- Reboot: Send reboot client command to client.
- Group Status: inquire all clients in the same group to send status back, similar to j)
Below is individual client command, not group command
i) Status: inquire client to send back current status data including time, current playback
filename, music and instant message. Example: Playing [01:54:30]
BATMANBEGINS_1.DIVX(5/11,16) 0:0:6, Scrolling Text: IntoTheBlue.txt
j) Capacity: inquire client to report CF card capacity and firmware version #. Example:
Storage Total Size: 977MB, Free Space: 762MB. F/W version: v2.2.86.0619U
k) CF Data: Inquire client to report all the filenames on the CF card. It will display
filenames on the CF tab screen of CAT.
l) CF Data [Delete]: Click right mouse button on CF window, a ‘Delete’ will pop up. You
can check all the files to be deleted first then click ‘Delete’. CAT will send delete
command to client to remove those checked files and update CF Data screen.
m) Playlist: Inquire client to report current playlist file. It will display the playlist file order
on the playlist tab screen of CAT
[Note] Log data:
When you move mouse cursor on the log window area, you can click right mouse button. A
menu will pop up to choose “Save As” or ”Clear”. Clear is to clear up the log data. Save As
is to allow you to save all the log history for technical support. You can send this .log file to
MIA for data analysis.