I-Tech ENP100 User Manual - page 6
V3.0(06198) 6
9/16/2008
finished, press “Select” or “ Goto” key again to exit virtual keyboard mode. Press
ENTER key on ‘user name’ or ‘password’ to go to next page
b. Server IP and Host Name: Move cursor to select ‘Server static IP’ or ‘Host
Name’. Use numeric key pad of remote to type 3 digits for static IP or use virtual
keyboard to type ‘Host Name’. Press ENTER to next page. (Server IP is the PC’s
IP where your CAT program is running. Host Name is go out to internet server)
c. Server Port (new feature): default is 5021. If not, please use remote control to
enter ‘05021’. This port number must match with CAT’s. Please go to CAT’s
Server Setup Utility to modify server’s port number if 5021 is already occupied.
After port changed, close CAT and open again to make new port effective.
d. Client DHCP or Static IP: Move cursor to select ‘DHCP’ or ‘Static IP’ and press
ENTER on ‘Static IP’ to Static IP page or DHCP to Setup screen. (DHCP is
recommended.)
‘Time’ Setup Screen
a. Time Server: Use cursor left or right to select ‘time.nist.gov’ or
‘windows.time.com’. Use cursor down to next item
b. Date: you can ignore this because client board will get internet time during
power up initialization unless you don’t have internet connection
c. Time: Same as Date
d. Time Zone: Use cursor left or right to select your local time zone
e. DST(Day Saving Time): Use cursor to select On or OFF. If On, it will add one
hour
f.
Date Format:
This date format will appear on scroll bar only. User can select
either mm/dd/yyyy or dd/mm/yyyyformat.
g. Press ENTER on any field to go back to Setup screen
‘Device Schedule’ Setup Screen
a.
Reboot Time: Move cursor to select ‘OFF’ or type 2 digits for daily reboot
time. When time is up, client will reboot itself. If auto start is set to network
mode, it will download new playlist file.
Also player will send playback log
data back to server for further usage.
b. Device Schedule: Move cursor to ‘OFF’ or ‘ON’. If ‘ON’, another line below
will display ‘HH MM to HH MM’. Device ON time will turn on video and start
to play from existing playlist file in the CF card. Device OFF time will turn off
video and stop playing.
Auto Start Screen
a. OFF: After power up, client will do nothing and wait for server’s command
b. Local CF: After power up, client will playback according to playlist file stored
in the CF card or playback A-Z order files if no playlist file is found.
c. HTTP URL: Use CAT’s client setup utility to enter network URL path. After
power up, client will go to this URL path to download playlist file and execute
action item listed in the playlist file. (also described on page 2 item IV)