I-Tech ENP100 User Manual - V. Client Device Setup
V3.0(06198) 5
9/16/2008
V. Client Device Setup
1. Client board Installation
- High speed CF memory card is required (Sandisk Ultra II recommended)
- Use PC to format CF card with
FAT32
selection for better performance
- Plug in CF card into CF slot
- Plug in LAN cable that connect to your LAN or internet network
- Connect video cable (RCA or S-Video) to your TV unit or VGA to your PC monitor
- Switch to right video source input channel on TV unit
- Connect audio cable to TV unit’s audio connectors
- Connect AC power adapter
- Power on network player (led light should be ON and screen displays ‘Initializing’)
2. Client Main Menu
- TV screen will show “Initializing”, “Initializing LAN”, “Connecting DHCP Server..”,
“IP Address”, “CF Card” then main menu
Note: It will take some time on the “Connecting to DHCP Server” depending on the IP
assignment speed from network router
- Main menu will show the following items on left side
• Client Local IP: xxx.xxx.xxx.xxx
• Server IP: xxx.xxx.xxx.xxx or Host name
• Time: 2007/06/01 15:30
• MAC Address: xx-xx-xx-xx-xx-xx
• Server Connection: ON or OFF or Error
• Storage: xxxMB
- Main Menu will show the following items on the right side
• Setup
: press ENTER key to go into Client Setup screen
• Storage : Press ENTER key to go to file folder of CF card
3. Client Setup Screen
- Use remote control to navigate and make changes
- Press ENTER from main menu to Setup screen
- Setup has ‘Network’, ‘Time’, ‘Device Schedule’, ‘Auto Start’,‘Language’, ‘Factory
Default’, ‘Save and Reboot’ and ‘Return to Menu’ selections.
- Press ENTER on any item to go to its page
‘Network’ Setup Screen
a. User Name and Password: Use “Select” or “Goto” key to open virtual keyboard.
Move cursor to any letter and press ENTER, or use ‘0’ (zero) to erase letter. After