I WARM 730 User And Installation Manual - Installation and Connection
Manual is about: Room Thermostat
of
24
15
Installation and connection
IMPORTANT!
Switch off the wiring before installing a thermostat whether
checking or replacing. A qualified electrician must perform
electrical connections and device connection to the heater.
The manufacturer's guarantee doesn't cover malfunction due
to incorrect connections/installation of the unit.
Please study the present manual carefully before commence
ment of all electrical connections.
Tools and materials required for thermostat installation:
1. Corrugated plastic tube 12–16 mm in diameter; the
length depends on distance between the thermostat and the
both sensors of temperature
2. Double size junction box for wall mounting units
3. Flat head screwdriver
4. Crosspoint screwdriver