I WARM 730 User And Installation Manual - Caution
CAUTION
— Do not at any time place pressure on the LED
Screen during installation!
Assemble the thermostat acting in reverse order. Place
the frame carefully; be sure, that it fits tightly to the device's
case. Then place the front cover carefully and push it till both
locks fix it. Be sure that the front cover is fixed properly.
Technical specification
Power supply voltage . . . . . . . . . . . . . . . . . . . . . 240 VAC
Maximum load current . . . . . . . . . . . . . . . . . . . . . . . 2
х
8 А
Watt consumption . . . . . . . . . . . . . . . . . . . . . . . 1350 mW
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 gr
Dimensions . . . . . . . . . . . . . . . . . . . . . . . 116
х
82
х
54 mm
Data stored (with battery back up) . . . . . . . . . 12 months
Protection index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP20
Remote floormounting
temperature sensor . . . . . . . . . . . . . . . . . NTC 6,8 kOhm
Length of sensor connection cable . . . . . . . . . . . . . . 2 m
Maintaining temperature range from . . . . . +5 to +35
О
С
Factory preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . +25
О
С
22